Post by Pegasus on May 4, 2013 15:41:03 GMT -5
Hey guys, some of you may know me. I am an Airsoft tech who can basically get a gun to do anything you want it to do. I cane here to offer my tech work to anyone who wants it. Here are my prices:
Basic Tune Up: $25 + parts.
Perfect shimming. ( I perform the bevel to pinion method, NOT the outdated spur method. I also take my time shimming. Each gearbox I shim takes me an hour to perfect.)
AOE Correction.
Airseal perfection.
Gearbox and gears cleaned.
Cylinder polished.
Bushings/bearings glued in place.
Re-grease.
+
Any parts you want installed.
If your gun has nylon bushings, they will be replaced by solid metal bushings. Which will be added to cost. $5 for bushings.
Advanced Tune Up: $35 + parts.
Basic Tune Up
+
Gearbox, gears, spring guide, cylinder head - polished.
Tappet plate trimmed for better air transfer.
Deans.
+
Any parts you want installed.
"Broken" AEG diagnose: $ ?
(Price depends on what is broken, I won't charge for a simple fix, examples: fuse blown, motor connectors, battery dead, ect.)
Hopup/Barrel OverHaul: $15
Flat hop.
Teflon wrapped bucking. (Airseal)
Shim hop up arm.
My hopup spacer added to arm.
Barrel polished.
Barrel stabilized.
200ft accuracy range guaranteed. (Above 350FPS.)
LiPo "Ready" upgrade:
Working on numbers for cost.
Deans:
$5 a gun, battery, and charger.
I only work on TM compatible guns, example(s): JG, G&G, Echo1, AGM, D-boys, ICS, KWA, A&K, Lancer Tactical, ect.
I don't work on Systema PTW or CTW guns.
Nor any G&D DTW's or A&K DTW's.
I also use reliable, strong, and cheap parts on builds, I do NOT use Systema parts, they're weak, overpriced, unreliable, and incapable of being used in the most basic set ups.
A Systema "Bore up" Cylinder kit cost around $80... That's outrageous, I do the same thing with other parts for around $20.
I back up all my work with a 3 week warranty. If your gun breaks, under my fault, contact me and I'll fix it for free. Gearbox being opened during warranty voids the warranty. I have a lot of experience in AEG tech work, I've worked on every gearbox version except versions 5 & 8. I've worked on every gun model out there, m16, m4, Ak, P90, mp5, G36 (all of them) even FAL and FNC lol.
If you don't want to pay in money, I will accept trades for my work. Though, I must agree to the trade.
I would also like to add what my achievements are:
220ft range at 150fps.
33RPS at 380FPS on my P90. Took me around $60 to do.
27RPS at 350FPS on my JG G36c with stock gears, motor, and piston. took me around $40 to do.
Countless 30RPS builds for other people. lol
Any questions? Contact me
Basic Tune Up: $25 + parts.
Perfect shimming. ( I perform the bevel to pinion method, NOT the outdated spur method. I also take my time shimming. Each gearbox I shim takes me an hour to perfect.)
AOE Correction.
Airseal perfection.
Gearbox and gears cleaned.
Cylinder polished.
Bushings/bearings glued in place.
Re-grease.
+
Any parts you want installed.
If your gun has nylon bushings, they will be replaced by solid metal bushings. Which will be added to cost. $5 for bushings.
Advanced Tune Up: $35 + parts.
Basic Tune Up
+
Gearbox, gears, spring guide, cylinder head - polished.
Tappet plate trimmed for better air transfer.
Deans.
+
Any parts you want installed.
"Broken" AEG diagnose: $ ?
(Price depends on what is broken, I won't charge for a simple fix, examples: fuse blown, motor connectors, battery dead, ect.)
Hopup/Barrel OverHaul: $15
Flat hop.
Teflon wrapped bucking. (Airseal)
Shim hop up arm.
My hopup spacer added to arm.
Barrel polished.
Barrel stabilized.
200ft accuracy range guaranteed. (Above 350FPS.)
LiPo "Ready" upgrade:
Working on numbers for cost.
Deans:
$5 a gun, battery, and charger.
I only work on TM compatible guns, example(s): JG, G&G, Echo1, AGM, D-boys, ICS, KWA, A&K, Lancer Tactical, ect.
I don't work on Systema PTW or CTW guns.
Nor any G&D DTW's or A&K DTW's.
I also use reliable, strong, and cheap parts on builds, I do NOT use Systema parts, they're weak, overpriced, unreliable, and incapable of being used in the most basic set ups.
A Systema "Bore up" Cylinder kit cost around $80... That's outrageous, I do the same thing with other parts for around $20.
I back up all my work with a 3 week warranty. If your gun breaks, under my fault, contact me and I'll fix it for free. Gearbox being opened during warranty voids the warranty. I have a lot of experience in AEG tech work, I've worked on every gearbox version except versions 5 & 8. I've worked on every gun model out there, m16, m4, Ak, P90, mp5, G36 (all of them) even FAL and FNC lol.
If you don't want to pay in money, I will accept trades for my work. Though, I must agree to the trade.
I would also like to add what my achievements are:
220ft range at 150fps.
33RPS at 380FPS on my P90. Took me around $60 to do.
27RPS at 350FPS on my JG G36c with stock gears, motor, and piston. took me around $40 to do.
Countless 30RPS builds for other people. lol
Any questions? Contact me