Specs
Full Member
Posts: 194
|
Post by Specs on Mar 2, 2011 23:31:24 GMT -5
|
|
|
|
Post by sdk1968 on Mar 3, 2011 8:28:39 GMT -5
you should probably just ask Kyle or Isaac since thats where your geting the motor... im sure they wouldnt steer you wrong.
nice fellas.
s
|
|
Specs
Full Member
Posts: 194
|
Post by Specs on Mar 3, 2011 10:16:41 GMT -5
I am talking to Jonah but I still wanted some other tips and I am not saying that there bad I will even go his way probably I just want some more.
|
|
EDGE
Full Member
Posts: 249
|
Post by EDGE on Mar 3, 2011 11:54:09 GMT -5
Whatever you do, if you upgrade the spring be sure to upgrade to a composite piston with metal gear teeth. I put an M120 in mine and it stripped the piston in the first few minutes of Blind Fury VI.
|
|
Specs
Full Member
Posts: 194
|
Post by Specs on Mar 3, 2011 12:10:12 GMT -5
I was looking at the piston with half of the teeth to be steel.
|
|
|
|
Post by rig on Mar 3, 2011 12:11:21 GMT -5
Only replace the broken parts.....
If nothing is wrong with the internals don't replace them. If you want it to shoot better. Think about a barrel or hop up bucking.
|
|
|
|
Post by 79stang on Mar 3, 2011 14:47:10 GMT -5
What gun is this going in? What fps do you want? Are there any other upgrades that you would like?
|
|
Specs
Full Member
Posts: 194
|
Post by Specs on Mar 3, 2011 14:50:07 GMT -5
@rig okay I will just do that then.
|
|
|
|
Post by rig on Mar 3, 2011 17:12:19 GMT -5
@stang. He's got a stock DBoys that he wants to upgrade and work on. Though Stang did bring some thing I didn't think about. An m110 spring.
|
|
Specs
Full Member
Posts: 194
|
Post by Specs on Mar 3, 2011 17:32:38 GMT -5
Oh sorry forgot that sorry yeah its a stock D-Boys right now. So is a m110 a good idea to put in there?
|
|
|
|
Post by rig on Mar 3, 2011 18:42:06 GMT -5
It's worth considering AFTER the motor, bucking and barrel.
|
|
Specs
Full Member
Posts: 194
|
Post by Specs on Mar 3, 2011 19:45:49 GMT -5
Okay will do.
|
|
|
|
Post by 79stang on Mar 4, 2011 10:42:09 GMT -5
The barrel, hop up bucking will probably be the first set of upgrades you should look at doing. I would go with a Madbull 6.01 tightbore, just use quality ammo and the madbull hop ups are really nice. I am not sure what the stock fps is on your Dboys, but I know my old JG was around 410, then lost compression and went to like 380. I would guess that it has an M120 in it. A guarder M110 will put you at about 350-380 fps and will lesson the stress on your gearbox (last longer). If you replace the spring I would also get metal bushings. Then if you wanted to go with a new piston, I would go with a polycarb with metal teeth (best of both worlds). After all of this, then I would go with the high speed (not torque) motor.
At this point you have put about 150 bucks into you essentially new gun. I did this with my G&G M16 and after I rebuilt it, I havent opened it up in a year or so. It shoots 370 fps with about 18-20rps. This is with the stock motor, it would be higher with the hi speed motor. If you really wanted to go crazy you could get high speed gears too, with a lipo and mosfet. Then you would be around 25-30 rps.
|
|
|
|
Post by rig on Mar 4, 2011 11:40:30 GMT -5
He has to start with the motor. It's dead.  I don't know about the newer DBoys. But the older ones have pitiful motors. My son's did not last long at all. |
|
|
|
Post by 79stang on Mar 4, 2011 11:48:17 GMT -5
Well, that would be ideally what he would do. I guess since he needs the motor the high speed would still be the way to go, unless he wants to make his M4 a DMR (Facepalm) and put a bigger spring in it.
|
|
I don't know about the newer DBoys. But the older ones have pitiful motors. My son's did not last long at all. 